|
|
|
|
| 48 hour insured delivery free of charge within the UK | |
| The Evolution Range | |
| The most versatile watch winder of the Evolution range. The base unit is a single winder available in four distinct colours and which can be used as a stand alone item. Also available are double and quad cases, constructed in gloss finish Ebony, into which you can slot base unit winders in any combination of colours you desire, thus enabling the owner to add to his collection with ease. | |
 |
EVO5 - Single cube watch
winder finished in high gloss Blue. Size: 120 x 120 x 146mm �190.00  |
 |
EVO7 - Single cube watch winder finished in high gloss Black. Size: 120 x 120 x 146mm �190.00 |
 |
EVO6 - Single cube watch
winder finished in high gloss Red. Size: 120 x 120 x 146mm �190.00 |
 |
EVO4 - Single cube watch
winder finished in high gloss White. Size: 120 x 120 x 146mm �190.00 |
 |
FRO2 - Double Case Double holder in high gloss finish Ebony into which you can slot base unit winders in any combination of colours you wish. Size:140 x 280 x 150mm �85.00 |
 |
FRO4 - Quad Case Quad holder in high gloss finish Ebony into which you can slot base unit winders in any combination of colours you wish. Size: 280 x 280 x 150mm �98.00 |
 |
Atomic
Single Watch Winder - EVO3 An exciting, science fiction inspired design in chrome and ebony. The mechanism is mounted in a chrome sphere suspended on chrome springs over an ebony wooden base which contains the battery compartment and control functions. Size: base:280 x 250mm. Height.250mm �220.00 |
 |
Pyramid
Single Winder - EVO2 Single watch winder in a mystical pyramid design finished in ebony and chrome with the tip being stainless steel. The watch carrier mechanism has a chrome bezel and the controls are easily accessible on the rear of the unit. Size: Base: 216 x 216mm Height: 210mm �220.00 . |
 |
Trophy Single Watch Winder - EVO1 A single watch winder in matt black lustre finish with chrome plated sphere. Size: base: 156 x 156mm Height:200mm �220.00 |
| The Optima
Series.....a New Generation of Watch Winders The watch carriers in this series have improved flexibility to accommodate virtually any size watch strap, leather or metal bracelet. There is a screw adjustment to the front of the carrier and a sprung pad on the reverse. A soft padded leather covering prevents damage to the watch. The carrier then slots snugly into the driving mechanism and there is no danger of the watch falling off it's mount. These ranges also incorporate the next generation of technology in the winder mechanisms - they can be set to revolve in one direction only (clockwise or anti-clockwise) or in a combination of both directions and there is an infinite control on the speed of rotation. These elements of control are vital for certain types of automatic watches and you should refer to manufacturers recommendations to obtain optimum results from your watch winder. |
|
 |
Ebony +
Aluminium - W261 A sophisticated range of watch winders with a luxurious piano-finish Ebony which perfectly compliments the polished aluminium framing around the thick bevelled glass windows. The interior is lined in grey, soft touch velveteen while the controls, feet and hinges are chrome plated. The watch carriers are as fitted to the rest of the Optima series. Size: 190h x 190w x 160mm deep. �310.00 |
 |
F3 Carbon Fibre + Aluminium - W251 A contemporary combination of carbon fibre and brushed aluminium with bevelled glass panels. A grey velveteen lines the interior and the controls, feet and hinges are chrome plated. Size: 190h x 190w x 160mm deep. �310.00 |
The Perpetua range of watch winders for automatic watches consists of models to accommodate 1,2 or 4 watches and are available in a variety of luxurious finishes. Each model is of wood construction with the outer surfaces being finished with eight coats of hand applied lacquer - with the exception of the genuine leather model. Metal fitments - hinges, feet etc. are chrome or gold plated and the interiors are lined with a soft feel velvet fabric. Perpetua Mono |
|
 |
Satin -
W100 The natural Walnut finish is enhanced by the soft satin varnish which gives each item a smooth to the touch surface, with beige interior. Size 6" high x 7 1/2" wide x 6" deep. �175.00
|
 |
Mahogany
- W105 Hand applied lacquered finish single winder with burgundy interior. Size 6" high x 7 1/2" wide x 6" deep. �175.00
|
 |
Cherry wood - W106 Hand applied lacquered finish single winder with beige interior. Size 6" high x 7 1/2" wide x 6" deep. �175.00
|
 |
Dark
Green - W107 Hand applied lacquered finish single winder with beige interior. Size 6" high x 7 1/2" wide x 6" deep. �175.00
|
 |
Ebony - W108 Hand applied lacquered finish single winder with pale grey interior. (not dark blue as pictured) Size 6" high x 7 1/2" wide x 6" deep. �175.00
|
Captains
range
|
|
 |
W161 - The cabinets are hand finished in highly polished mahogany and have brass corner protection details, foldaway handles and lock. The interiors are lined with a soft feel beige velvet. Size 7 1/2" high x 12" wide x 11 1/2" deep. �290.00
|
|
|
 |
W201 - The walnut burr range of watch winders and collector boxes has a refined look that exudes quality and traditional appeal. These cases are adorned with a genuine Walnut Burr wood veneer while the edges and surround of the lid are finished in Ebony. The final application of a deep gloss lacquer makes these cases fine examples of the cabinetmakers art. The interiors are lined with a soft touch velvet material. Size 6" high x 7 1/2" wide x 6" deep. �250.00
|
| Leather Winders | |
 |
Ref EW03 BL
- Genuine Black Leather Winder, multi setting quality winder with superior
motors and quietness. Curved glass in black genuine leather. Battery
operated or mains adaptor option. Size: 13 x 19.5 x 16.5cm. �210.00 SOLD OUT |
 |
Ref EW12 BL Safe storage winder with dust cover in genuine black leather. Battery operated or Mains adaptor. Size: 12 x 12 x 16cm �175.00 SOLD OUT |
 |
Ref EW15 BL Stylish single watch winder made from the finest natural black leather. Battery operated or Mains adaptor. (14x17x17cm) �225.00 SOLD OUT |
